Specifications
Electrical parameters
Light source | LED |
Power voltage | AC 220–240 V / 50–60 Hz |
Connection method | leading out cable, leading out cable with connector (G) disconnect terminal block (O), without cable (WO) |
Ballast part | electronic driver with surge protection L/N-Ground 10 kV |
Surge protection | additional surge protection 10 kV (S) |
Fuse | fuse 6,3 A (J) |
Possibility of regulation | non-dimmable (not labeled), DALI (DALI), night dimming (A) preparation for wireless communication NEMA (N), Zhaga (Z) or 2× Zhaga (Z2) |
Sensor | motion sensor (on request) |
Constant lumen output | CLO (C) |
Light parameters
Optical system | roads (Mxx), roads (Lxx), directional (Pxx), AMBER module (Nxx), AMBER optik (Alxx) BACK Light mask (BM2) area (Uxx), pedastrian crossing (ZLx/ZPx) combined optics (Kxx) |
Light distribution | direct |
Colour rendering index | Ra > 70, Ra > 80 |
Colour temperature | AMBER / 2,200 K / 2,700 K / 3,000 K / 4,000 K / 5,000 K |
Service life | > 100,000 hrs. (L90B10) |
Construction
Luminaire body | aluminum cast |
Colour | RAL 7015 |
Surface type | matte |
Luminaire cover | tempered glass |
Safety
Protection class | I, II |
Maximum ambient temperature | -40 / 55 °C |
Ingress proection | IP 66 |
Impact protection | IK 09 |
Mounting
Method | pole (48–89 mm), on the wall |
Recommended height | max. up to 8 m |
Use | cycle paths, pedestrian zones, sidewalks, outdoor areas |